Flux

Displaying 1 to 10 (of 13 products)

Manufacturer	Item Name	Price
Carr's	Carr's Red Flux for white metal - 50ml. This is an organic flux compound, which is very active at low temperature. It is ideal for use with whitemetal, and is also suitable for other nonferrous metals. It breaks down at around 240° C to leave non-corrosive residues. However, this should not be assumed and the joint should be rinsed or...	£4.00 Add:
Carr's	Carr's Red Flux for white metal - 250ml. This is an organic flux compound, which is very active at low temperature. It is ideal for use with whitemetal, and is also suitable for other nonferrous metals. It breaks down at around 240° C to leave non-corrosive residues. However, this should not be assumed and the joint should be rinsed or...	£14.00 Add:
Carr's	Carr's Green Flux for general purpose soldering - 50ml. Green label, for most modeller’s is the flux they instinctively turn to. It is suitable for use with steel, (but not stainless steel), Copper, Brass, nickel silver and similar alloys. It is an active flux and leaves residues that are corrosive. For that reason, care should be taken to remove these....	£3.50 Add:
Carr's	Carr's Green Flux for general purpose soldering - 250ml. Green label, for most modeller’s is the flux they instinctively turn to. It is suitable for use with steel, (but not stainless steel), Copper, Brass, nickel silver and similar alloys. It is an active flux and leaves residues that are corrosive. For that reason, care should be taken to remove these....	£12.25 Add:
Carr's	Carr's Yellow Flux for copper based alloys - 50ml. This is an ideal flux to use when soldering whitemetal, brass, nickel silver and other copper based alloys. It is extremely easy to remove any residue after soldering, with Neutralizing Rinse or water.	£3.50 Add:
Carr's	Carr's Yellow Flux for copper based alloys - 250ml. This is an ideal flux to use when soldering whitemetal, brass, nickel silver and other copper based alloys. It is extremely easy to remove any residue after soldering, with Neutralizing Rinse or water.	£12.25 Add:
Carr's	Carr's Orange Flux - non corrosive flux - 50ml. A non-corrosive flux, which should be used for jobs that cannot be washed, such as gearbox casings, track laying, and electrical wiring. This flux is compatible with speedy solder. It is ideal for wiring repairs where adequate solder is already present. The residues should be cleaned off with...	£4.50 Add:
Carr's	Carr's Orange Flux - non corrosive flux - 250ml. A non-corrosive flux, which should be used for jobs that cannot be washed, such as gearbox casings, track laying, and electrical wiring. This flux is compatible with speedy solder. It is ideal for wiring repairs where adequate solder is already present. The residues should be cleaned off with...	£16.25 Add:
Carr's	Carr's Black Flux for steel - 50ml. This is a powerful general-purpose flux for steel and galvanised metals. The residues should neutralised with Neutralising Rinse and then washed off with warm water. This flux is an equivalent to Bakers Fluid for steel.	£3.00 Add:
Carr's	Carr's Brown Flux for the toughest soldering jobs - 50ml. Brown label flux is formulated for soldering most stainless steels and other difficult metals such as ni-chrome resistance wires. It is also good for piano wire, syringe needles etc. Residues should be carefully washed away in warm water. NB. Stainless steels should be soldered at the lowest...	£8.00 Add: