Nairnshire Modelling Supplies




Manufacturer Product Image Item Name Price
Nairnshire Modelling Supplies Pack of 10 470R resistors of 0.5W capacity.

Pack of 10 470R resistors of 0.5W capacity.

Pack of ten Carbon Film resistors rated at 470 Ohm. They are 0.5W rated and relatively large in size - good heat dissipation. Suitable for use with the LEDs listed on the site.
£0.25

Add:

Nairnshire Modelling Supplies Shrouded Crocodile clip red.

Shrouded Crocodile clip red.

One good quality 54mm shrouded (insulated) red Crocodile clip.
£0.35

Add:

Nairnshire Modelling Supplies White styrene card: 1 sheet of 30 thou (0.75mm).

White styrene card: 1 sheet of 30 thou (0.75mm).

One sheet of 30 thou (0.75mm) high quality white styrene card (HIPS). Matt finish on both sides. The sheet measures approximately 273mm by 220mm.
£0.95

Add:

Nairnshire Modelling Supplies 2mm bore axle spacing shim washers 0.25mm thick pack of 24.

2mm bore axle spacing shim washers 0.25mm thick pack of 24.

24A pack of 12 precision turned brass axle shim washers designed to be used as axle spacers for locomotive and rolling stock building. They also have uses in model engineering and other motorised model projects. Each bearing has a bore of 2mm and is 0.25mm thick. The perfect partner for our 2mm...
£2.40

Add:

Nairnshire Modelling Supplies GREEN 10 pack of 2mm light house green LEDs.

GREEN 10 pack of 2mm light house green LEDs.

A bulk pack of 10 lighthouse LEDs with a 2mm diameter tower which directs the light in a tight beam. A resistor must be used in the circuit to protect it, especially if using them on a circuit with a DCC decoder function output. A pack of 10 for the price of 9 singles including resistors.
£2.00

Add:

Nairnshire Modelling Supplies Pack of 10 1K resistors of 0.125W capacity.

Pack of 10 1K resistors of 0.125W capacity.

Pack of ten Carbon Film resistors rated at 1K. They are 0.5W rated and relatively small in size.
£0.25

Add:

Nairnshire Modelling Supplies 2mm bore axle spacing shim washers 0.5mm thick pack of 12.

2mm bore axle spacing shim washers 0.5mm thick pack of 12.

A pack of 12 precision turned brass axle shim washers designed to be used as axle spacers for locomotive and rolling stock building. They also have uses in model engineering and other motorised model projects. Each bearing has a bore of 2mm and is 0.5mm thick. The perfect partner for our 2mm inner...
£1.40

Add:

Nairnshire Modelling Supplies 0.4mm straight phosphor-bronze wire - pack of 10 pieces.

0.4mm straight phosphor-bronze wire - pack of 10 pieces.

Fine quality straightened (springy) phosphor-bronze wire precision drawn to 0.4mm diameter making it suitable for current collection pick-ups and a variety of other modelling applications. Approximately 300mm (12 inches) in length. Pack of 10 lengths supplied in a protective plastic sleeve. This...
£2.95

Add:

Nairnshire Modelling Supplies 0.4mm HSS drill bit.

0.4mm HSS drill bit.

A high quality HSS (High Speed) drill bit for all modelling purposes. It is 0.4mm in diameter. This type can be used to drill various materials including plastic.
£0.50

Add:

Nairnshire Modelling Supplies 0.8mm drill bit for PCB and plastic only

0.8mm drill bit for PCB and plastic only

A high precision drill bit for printed circuit board and plastics only. Not to be used on metals or other hard materials. It is a high quality drill with a wide shank.
£0.50

Add:



Copyright © 2019 Nairnshire Modelling Supplies. Powered by Zen Cart