Nairnshire Modelling Supplies




Manufacturer Product Image Item Name Price
Nairnshire Modelling Supplies 50 x Top Hat (standard) rolling stock bearings.

50 x Top Hat (standard) rolling stock bearings.

A pack of 50 high quality turned brass top hat (flanged) bearings for wagons and coaching stock. They are 2mm in diameter and designed to work with pin point axles. Also known as 'standard' bearings.
£3.00

Add:

Nairnshire Modelling Supplies 1m Heat shrink sleeve - 1.6mm diameter, 2:1 ratio.

1m Heat shrink sleeve - 1.6mm diameter, 2:1 ratio.

500mm of 1.6mm black heat shrink sleeving with a 2:1 shrink ratio. perfect for insulating joins in wires, connections to LEDs and other similar purposes.
£1.00

Add:

Nairnshire Modelling Supplies 0.25mm Optic Fibre - 500mm length

0.25mm Optic Fibre - 500mm length

500mm of single strand (filament) optic fibre for all kinds of hobby applications. It is an 'end glow fibre in which light is introduced at one end and glows from the other. The fibre is flexible enough to be bent around corners. It has numerous lighting applications, particularly for smaller...
£0.80

Add:

Nairnshire Modelling Supplies 0.3mm straight brass wire - pack of 10 pieces.

0.3mm straight brass wire - pack of 10 pieces.

Fine quality eye-straight brass wire - sold in packs of ten. Approximately 12 inches in length. Will suit many other modelling applications. It is hard brass, perfect for bending and folding.
£2.50

Add:

Nairnshire Modelling Supplies 0.4mm drill bit for PCB and plastic only

0.4mm drill bit for PCB and plastic only

A high precision drill bit for printed circuit board and plastics only. Not to be used on metals or other hard materials. It is a high quality drill with a wide shank.
£0.50

Add:

Nairnshire Modelling Supplies 1/8th inch brass axle bushes (main frame bearings). Pack of 12.

1/8th inch brass axle bushes (main frame bearings). Pack of 12.

A pack of 12 precision turned brass axle bushes (main frame bearings) for locomotive and rolling stock building. They also have uses in model engineering and other motorised model projects. Each bearing has a bore of 1/8th inch, and outer body diameter of 3.8mm and a flange diameter of 4.8mm. The...
£2.80

Add:

Nairnshire Modelling Supplies 1m Heat shrink sleeve - 2.4mm diameter, 2:1 ratio.

1m Heat shrink sleeve - 2.4mm diameter, 2:1 ratio.

500mm of 2.4mm black heat shrink sleeving with a 2:1 shrink ratio. perfect for insulating joins in wires, connections to LEDs and other similar purposes.
£1.00

Add:

Nairnshire Modelling Supplies 50g of 105 degree solder for modelling and kit building.

50g of 105 degree solder for modelling and kit building.

105 degree solder is a low-melt solder useful for a variety of modelling applications, particularly kit building involving white metal parts. It can be used for some brass and nickel-silver construction where large pieces may result in heat loss from the soldering iron tip. Sold as strips in packs...
£4.85

Add:

Nairnshire Modelling Supplies 7mm scale coach and wagon wheel bearings X20.

7mm scale coach and wagon wheel bearings X20.

High quality standard turned brass coach and wagon (rolling stock) bearings for O gauge (7mm scale) with a 2.4mm wide body and an inner diameter of 1.5mm. They also have uses in model engineering and other motorised model projects. Each bearing has an outer body diameter of 2.4mm and a flange...
£4.20

Add:

Nairnshire Modelling Supplies Push To Make Switch - green.

Push To Make Switch - green.

A single push to make switch with a green top. Screw fittings included.
£0.40

Add:



Copyright © 2017 Nairnshire Modelling Supplies. Powered by Zen Cart